When prompted for your pre-shared key: ‣ Pre-shared key: Enter the pre-shared key that you configured on the VPN gateway ‣ Optional: Check the box Store in Keychain to save the password in your keychain so you are not asked for it again when connecting the next time ‣ Click OK 12
IPSec identifier – Enter the group policy name that you entered for the IPsec PSK VPN on the Barracuda NextGen X-Series Firewall (e.g., IPsecVPN). IPSec pre-shared key – Enter the PSK. Connect to the VPN with the Android Device. After configuring the Android device, you can connect to the IPsec VPN. On the device, navigate to the VPN screen. Incorrect subnet mask on the client system: If the VPN subnets are close, say 192.168.0.x and 192.168.1.x, ensure that the subnet mask is 255.255.255.0 on the client systems. If one of them has an incorrect mask, such as 255.255.0.0, it will try to reach the remote systems locally and not send the packets out via the gateway. This could cause network issues for your PC if launched at work behind a cisco vpn router. Start the SonicWall Global VPN Client. Double click on the new connection or right click and hit enable You will be prompted to enter a Pre-Shared Key. If Mobile VPN with L2TP on the Firebox is configured to use a pre-shared key as the IPSec credential method: Select Use pre-shared key for authentication. In the Key text box, type the pre-shared key for this tunnel. The pre-shared key must match the pre-shared key configured on the Firebox Mobile VPN with L2TP IPSec settings.
Incorrect subnet mask on the client system: If the VPN subnets are close, say 192.168.0.x and 192.168.1.x, ensure that the subnet mask is 255.255.255.0 on the client systems. If one of them has an incorrect mask, such as 255.255.0.0, it will try to reach the remote systems locally and not send the packets out via the gateway.
The Credentials Pre Shared Key is defined as "mypresharedkey" to match the ASA tunnel group pre-shared-key. Known Issues. Cisco gateways support a proprietary form of hybrid authentication which does not conform to RFC draft standards. At this time the Shrew Soft VPN Client does not support this authentication mode. Shared secret: Enter the shared secret, also known as the pre-shared key (PSK). Be sure the value matches the shared secret configured on the VPN server. Server certificate issuer common name: Allows the VPN server to authenticate to the VPN client. Enter the certificate issuer common name (CN) of the VPN server certificate that's sent to the
Pre-8.3 code tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key MyVPNPassWord#@ ! --- It is the group password for all VPN users ! ! Post-8.3 code tunnel-group DefaultRAGroup ipsec-attributes Ikev1 pre-shared-key MyVPNPassWord#@ ! --- It is the group password for all VPN users. Step 3: Configure VPN Phase 1 and Phase 2
You have to get the user on that PC to open up the VPn client, modify the connection properties and change the password manually. The password on the VPN client is the pre-shared key (basically). 0